Heal info and split-brain resolution ======================================= This document explains the heal info command available in gluster for monitoring pending heals in replicate volumes and the methods available to resolve split-brains. ## Types of Split-Brains: A file is said to be in split-brain when Gluster AFR cannot determine which copy in the replica is the correct one. There are 3 types of split-brains: - Data split-brain: The data in the file differs on the bricks in the replica set - Metadata split-brain: The metada differs on the bricks - Entry/gfid split-brain: The GFID of the file is different on the bricks in the replica. This cannot be healed automatically. ## 1) Volume heal info: Usage: `gluster volume heal info` This lists all the files that require healing (and will be processed by the self-heal daemon). It prints either their path or their GFID. ### Interpreting the output All the files listed in the output of this command need to be healed. The files listed may also be accompanied by the following tags: a) 'Is in split-brain' A file in data or metadata split-brain will be listed with " - Is in split-brain" appended after its path/gfid. Eg., "/file4" in the output provided below. But for a file in gfid split-brain, the parent directory of the file is shown to be in split-brain and the file itself is shown to be needing heal. Eg., "/dir" in the output provided below which is in split-brain because of gfid split-brain of file "/dir/a". Files in split-brain cannot be healed without resolving the split-brain. b) 'Is possibly undergoing heal' When the heal info command is run, it (or to be more specific, the 'glfsheal' binary that is executed when you run the command) takes locks on each file to find if it needs heal. But if the self-heal daemon had already started healing the file, it would have taken locks due to which glfsheal wouldn't be able to acquire them. In such a case it could print this message. Another possible case could be multiple glfsheal processes running simultaneously (e.g., multiple users ran heal info command at the same time), competing for same lock. The following is an example of heal info command's output. ### Example Consider a replica volume "test" with 2 bricks b1 and b2; self-heal daemon off, mounted at /mnt. `gluster volume heal test info` ~~~ Brick \ - Is in split-brain - Is in split-brain - Is in split-brain Number of entries: 4 Brick /dir/file2 /dir/file1 - Is in split-brain /dir - Is in split-brain /dir/file3 /file4 - Is in split-brain /dir/a Number of entries: 6 ~~~ ### Analysis of the output It can be seen that A) from brick b1, 4 entries need healing:       1) file with gfid:6dc78b20-7eb6-49a3-8edb-087b90142246 needs healing       2) "aaca219f-0e25-4576-8689-3bfd93ca70c2", "39f301ae-4038-48c2-a889-7dac143e82dd" and "c3c94de2-232d-4083-b534-5da17fc476ac" are in split-brain B) from brick b2 6 entries need healing-       1) "a", "file2" and "file3" need healing       2) "file1", "file4" & "/dir" are in split-brain # 2. Volume heal info split-brain Usage: `gluster volume heal info split-brain` This command only shows the list of files that are in split-brain. The output is therefore a subset of `gluster volume heal info` ### Example `gluster volume heal test info split-brain` ~~~ Brick Number of entries in split-brain: 3 Brick /dir/file1 /dir /file4 Number of entries in split-brain: 3 ~~~ Note that similar to the heal info command, for gfid split-brains (same filename but different gfid) their parent directories are listed to be in split-brain. # 3. Resolution of split-brain using gluster CLI Once the files in split-brain are identified, their resolution can be done from the gluster command line using various policies. Entry/gfid split-brain resolution is not supported via this method. Split-brain resolution commands let the user resolve data and metadata split-brain using the following policies: ## i) Select the bigger-file as source This command is useful for per file healing where it is known/decided that the file with bigger size is to be considered as source. `gluster volume heal split-brain bigger-file ` Here, `` can be either the full file name as seen from the root of the volume (or) the gfid-string representation of the file, which sometimes gets displayed in the heal info command's output. Once this command is executed, the replica containing the `` with bigger size is found out and heal is completed with that brick as a source. ### Example : Consider the earlier output of heal info split-brain command. Before healing the file, notice file size and md5 checksums : ~~~ On brick b1: # stat b1/dir/file1 File: ‘b1/dir/file1’ Size: 17 Blocks: 16 IO Block: 4096 regular file Device: fd03h/64771d Inode: 919362 Links: 2 Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2015-03-06 13:55:40.149897333 +0530 Modify: 2015-03-06 13:55:37.206880347 +0530 Change: 2015-03-06 13:55:37.206880347 +0530 Birth: - # md5sum b1/dir/file1 040751929ceabf77c3c0b3b662f341a8 b1/dir/file1 On brick b2: # stat b2/dir/file1 File: ‘b2/dir/file1’ Size: 13 Blocks: 16 IO Block: 4096 regular file Device: fd03h/64771d Inode: 919365 Links: 2 Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2015-03-06 13:54:22.974451898 +0530 Modify: 2015-03-06 13:52:22.910758923 +0530 Change: 2015-03-06 13:52:22.910758923 +0530 Birth: - # md5sum b2/dir/file1 cb11635a45d45668a403145059c2a0d5 b2/dir/file1 ~~~ **Healing file1 using the above command** :- `gluster volume heal test split-brain bigger-file /dir/file1` Healed /dir/file1. After healing is complete, the md5sum and file size on both bricks should be the same. ~~~ On brick b1: # stat b1/dir/file1 File: ‘b1/dir/file1’ Size: 17 Blocks: 16 IO Block: 4096 regular file Device: fd03h/64771d Inode: 919362 Links: 2 Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2015-03-06 14:17:27.752429505 +0530 Modify: 2015-03-06 13:55:37.206880347 +0530 Change: 2015-03-06 14:17:12.880343950 +0530 Birth: - # md5sum b1/dir/file1 040751929ceabf77c3c0b3b662f341a8 b1/dir/file1 On brick b2: # stat b2/dir/file1 File: ‘b2/dir/file1’ Size: 17 Blocks: 16 IO Block: 4096 regular file Device: fd03h/64771d Inode: 919365 Links: 2 Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2015-03-06 14:17:23.249403600 +0530 Modify: 2015-03-06 13:55:37.206880000 +0530 Change: 2015-03-06 14:17:12.881343955 +0530 Birth: - # md5sum b2/dir/file1 040751929ceabf77c3c0b3b662f341a8 b2/dir/file1 ~~~ ## ii) Select the file with the latest mtime as source `gluster volume heal split-brain latest-mtime ` As is perhaps self-explanatory, this command uses the brick which has the latest modification time for `` and uses it as the source. ## iii) Select one of the bricks in the replica as the source for a particular file `gluster volume heal split-brain source-brick ` Here, `` is selected as source brick and `` present in the source brick is taken as source for healing. ### Example : Notice the md5 checksums and file size before and after heal. Before heal : ~~~ On brick b1: stat b1/file4 File: ‘b1/file4’ Size: 4 Blocks: 16 IO Block: 4096 regular file Device: fd03h/64771d Inode: 919356 Links: 2 Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2015-03-06 13:53:19.417085062 +0530 Modify: 2015-03-06 13:53:19.426085114 +0530 Change: 2015-03-06 13:53:19.426085114 +0530 Birth: - # md5sum b1/file4 b6273b589df2dfdbd8fe35b1011e3183 b1/file4 On brick b2: # stat b2/file4 File: ‘b2/file4’ Size: 4 Blocks: 16 IO Block: 4096 regular file Device: fd03h/64771d Inode: 919358 Links: 2 Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2015-03-06 13:52:35.761833096 +0530 Modify: 2015-03-06 13:52:35.769833142 +0530 Change: 2015-03-06 13:52:35.769833142 +0530 Birth: - # md5sum b2/file4 0bee89b07a248e27c83fc3d5951213c1 b2/file4 ~~~ **Healing the file with gfid c3c94de2-232d-4083-b534-5da17fc476ac using the above command** : `gluster volume heal test split-brain source-brick test-host:/test/b1 gfid:c3c94de2-232d-4083-b534-5da17fc476ac` Healed gfid:c3c94de2-232d-4083-b534-5da17fc476ac. After healing : ~~~ On brick b1: # stat b1/file4 File: ‘b1/file4’ Size: 4 Blocks: 16 IO Block: 4096 regular file Device: fd03h/64771d Inode: 919356 Links: 2 Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2015-03-06 14:23:38.944609863 +0530 Modify: 2015-03-06 13:53:19.426085114 +0530 Change: 2015-03-06 14:27:15.058927962 +0530 Birth: - # md5sum b1/file4 b6273b589df2dfdbd8fe35b1011e3183 b1/file4 On brick b2: # stat b2/file4 File: ‘b2/file4’ Size: 4 Blocks: 16 IO Block: 4096 regular file Device: fd03h/64771d Inode: 919358 Links: 2 Access: (0644/-rw-r--r--) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2015-03-06 14:23:38.944609000 +0530 Modify: 2015-03-06 13:53:19.426085000 +0530 Change: 2015-03-06 14:27:15.059927968 +0530 Birth: - # md5sum b2/file4 b6273b589df2dfdbd8fe35b1011e3183 b2/file4 ~~~ ## iv) Select one brick of the replica as the source for all files `gluster volume heal split-brain source-brick ` Consider a scenario where many files are in split-brain such that one brick of replica pair is source. As the result of the above command all split-brained files in `` are selected as source and healed to the sink. ### Example: Consider a volume having three entries "a, b and c" in split-brain. ~~~ `gluster volume heal test split-brain source-brick test-host:/test/b1` Healed gfid:944b4764-c253-4f02-b35f-0d0ae2f86c0f. Healed gfid:3256d814-961c-4e6e-8df2-3a3143269ced. Healed gfid:b23dd8de-af03-4006-a803-96d8bc0df004. Number of healed entries: 3 ~~~ ## Note: As mentioned earlier, entry split-brain and gfid split-brain healing are not supported using CLI. Trying to heal /dir would fail as it is in entry split-brain. ### Example `gluster volume heal test split-brain source-brick test-host:/test/b1 /dir` Healing /dir failed:Operation not permitted. Volume heal failed. However, they can be fixed by deleting the file from all but one bricks. See [Fixing Directory entry split-brain](#dir-split-brain) # An overview of working of heal info commands When these commands are invoked, a "glfsheal" process is spawned which reads the entries from the various sub-directories under `//.glusterfs/indices/` of all the bricks that are up (that it can connect to) one after another. These entries are GFIDs of files that might need healing. Once GFID entries from a brick are obtained, based on the lookup response of this file on each participating brick of replica-pair & trusted.afr.* extended attributes it is found out if the file needs healing, is in split-brain etc based on the requirement of each command and displayed to the user. # 4. Resolution of split-brain from the mount point A set of getfattr and setfattr commands have been provided to detect the data and metadata split-brain status of a file and resolve split-brain, if any, from mount point. Consider a volume "test", having bricks b0, b1, b2 and b3. ~~~ # gluster volume info test Volume Name: test Type: Distributed-Replicate Volume ID: 00161935-de9e-4b80-a643-b36693183b61 Status: Started Number of Bricks: 2 x 2 = 4 Transport-type: tcp Bricks: Brick1: test-host:/test/b0 Brick2: test-host:/test/b1 Brick3: test-host:/test/b2 Brick4: test-host:/test/b3 ~~~ Directory structure of the bricks is as follows: ~~~ # tree -R /test/b? /test/b0 ├── dir │   └── a └── file100 /test/b1 ├── dir │   └── a └── file100 /test/b2 ├── dir ├── file1 ├── file2 └── file99 /test/b3 ├── dir ├── file1 ├── file2 └── file99 ~~~ Some files in the volume are in split-brain. ~~~ # gluster v heal test info split-brain Brick test-host:/test/b0/ /file100 /dir Number of entries in split-brain: 2 Brick test-host:/test/b1/ /file100 /dir Number of entries in split-brain: 2 Brick test-host:/test/b2/ /file99 Number of entries in split-brain: 2 Brick test-host:/test/b3/ Number of entries in split-brain: 2 ~~~ ### To know data/metadata split-brain status of a file: ~~~ getfattr -n replica.split-brain-status ~~~ The above command executed from mount provides information if a file is in data/metadata split-brain. Also provides the list of afr children to analyze to get more information about the file. This command is not applicable to gfid/directory split-brain. ### Example: 1) "file100" is in metadata split-brain. Executing the above mentioned command for file100 gives : ~~~ # getfattr -n replica.split-brain-status file100 # file: file100 replica.split-brain-status="data-split-brain:no metadata-split-brain:yes Choices:test-client-0,test-client-1" ~~~ 2) "file1" is in data split-brain. ~~~ # getfattr -n replica.split-brain-status file1 # file: file1 replica.split-brain-status="data-split-brain:yes metadata-split-brain:no Choices:test-client-2,test-client-3" ~~~ 3) "file99" is in both data and metadata split-brain. ~~~ # getfattr -n replica.split-brain-status file99 # file: file99 replica.split-brain-status="data-split-brain:yes metadata-split-brain:yes Choices:test-client-2,test-client-3" ~~~ 4) "dir" is in directory split-brain but as mentioned earlier, the above command is not applicable to such split-brain. So it says that the file is not under data or metadata split-brain. ~~~ # getfattr -n replica.split-brain-status dir # file: dir replica.split-brain-status="The file is not under data or metadata split-brain" ~~~ 5) "file2" is not in any kind of split-brain. ~~~ # getfattr -n replica.split-brain-status file2 # file: file2 replica.split-brain-status="The file is not under data or metadata split-brain" ~~~ ### To analyze the files in data and metadata split-brain Trying to do operations (say cat, getfattr etc) from the mount on files in split-brain, gives an input/output error. To enable the users analyze such files, a setfattr command is provided. ~~~ # setfattr -n replica.split-brain-choice -v "choiceX" ~~~ Using this command, a particular brick can be chosen to access the file in split-brain from. ###Example: 1) "file1" is in data-split-brain. Trying to read from the file gives input/output error. ~~~ # cat file1 cat: file1: Input/output error ~~~ Split-brain choices provided for file1 were test-client-2 and test-client-3. Setting test-client-2 as split-brain choice for file1 serves reads from b2 for the file. ~~~ # setfattr -n replica.split-brain-choice -v test-client-2 file1 ~~~ Now, read operations on the file can be done. ~~~ # cat file1 xyz ~~~ Similarly, to inspect the file from other choice, replica.split-brain-choice is to be set to test-client-3. Trying to inspect the file from a wrong choice errors out. To undo the split-brain-choice that has been set, the above mentioned setfattr command can be used with "none" as the value for extended attribute. ### Example: ~~~ 1) setfattr -n replica.split-brain-choice -v none file1 ~~~ Now performing cat operation on the file will again result in input/output error, as before. ~~~ # cat file cat: file1: Input/output error ~~~ Once the choice for resolving split-brain is made, source brick is supposed to be set for the healing to be done. This is done using the following command: ~~~ # setfattr -n replica.split-brain-heal-finalize -v ~~~ ## Example ~~~ # setfattr -n replica.split-brain-heal-finalize -v test-client-2 file1 ~~~ The above process can be used to resolve data and/or metadata split-brain on all the files. NOTE: 1) If "fopen-keep-cache" fuse mount option is disabled then inode needs to be invalidated each time before selecting a new replica.split-brain-choice to inspect a file. This can be done by using: ~~~ # sefattr -n inode-invalidate -v 0 ~~~ 2) The above mentioned process for split-brain resolution from mount will not work on nfs mounts as it doesn't provide xattrs support. # 5. Automagic unsplit-brain by [ctime|mtime|size|majority] The CLI and fuse mount based resolution methods require intervention in the sense that the admin/ user needs to run the commands manually. There is a `cluster.favorite-child-policy` volume option which when set to one of the various policies available, automatically resolve split-brains without user intervention. The default value is 'none', i.e. it is disabled. ~~~~ gluster volume set help|grep -A3 cluster.favorite-child-policy Option: cluster.favorite-child-policy Default Value: none Description: This option can be used to automatically resolve split-brains using various policies without user intervention. "size" picks the file with the biggest size as the source. "ctime" and "mtime" pick the file with the latest ctime and mtime respectively as the source. "majority" picks a file with identical mtime and size in more than half the number of bricks in the replica. ~~~~ `cluster.favorite-child-policy` applies to all files of the volume. It is assumed that if this option is enabled with a particular policy, you don't care to examine the split-brain files on a per file basis but just want the split-brain to be resolved as and when it occurs based on the set policy. # Manual Split-Brain Resolution: Quick Start: ============ 1. Get the path of the file that is in split-brain: > It can be obtained either by > a) The command `gluster volume heal info split-brain`. > b) Identify the files for which file operations performed from the client keep failing with Input/Output error. 2. Close the applications that opened this file from the mount point. In case of VMs, they need to be powered-off. 3. Decide on the correct copy: > This is done by observing the afr changelog extended attributes of the file on the bricks using the getfattr command; then identifying the type of split-brain (data split-brain, metadata split-brain, entry split-brain or split-brain due to gfid-mismatch); and finally determining which of the bricks contains the 'good copy' of the file. > `getfattr -d -m . -e hex `. It is also possible that one brick might contain the correct data while the other might contain the correct metadata. 4. Reset the relevant extended attribute on the brick(s) that contains the 'bad copy' of the file data/metadata using the setfattr command. > `setfattr -n -v ` 5. Trigger self-heal on the file by performing lookup from the client: > `ls -l ` Detailed Instructions for steps 3 through 5: =========================================== To understand how to resolve split-brain we need to know how to interpret the afr changelog extended attributes. Execute `getfattr -d -m . -e hex ` * Example: [root@store3 ~]# getfattr -d -e hex -m. brick-a/file.txt \#file: brick-a/file.txt security.selinux=0x726f6f743a6f626a6563745f723a66696c655f743a733000 trusted.afr.vol-client-2=0x000000000000000000000000 trusted.afr.vol-client-3=0x000000000200000000000000 trusted.gfid=0x307a5c9efddd4e7c96e94fd4bcdcbd1b The extended attributes with `trusted.afr.-client-` are used by afr to maintain changelog of the file.The values of the `trusted.afr.-client-` are calculated by the glusterfs client (fuse or nfs-server) processes. When the glusterfs client modifies a file or directory, the client contacts each brick and updates the changelog extended attribute according to the response of the brick. 'subvolume-index' is nothing but (brick number - 1) in `gluster volume info ` output. * Example: [root@pranithk-laptop ~]# gluster volume info vol Volume Name: vol Type: Distributed-Replicate Volume ID: 4f2d7849-fbd6-40a2-b346-d13420978a01 Status: Created Number of Bricks: 4 x 2 = 8 Transport-type: tcp Bricks: brick-a: pranithk-laptop:/gfs/brick-a brick-b: pranithk-laptop:/gfs/brick-b brick-c: pranithk-laptop:/gfs/brick-c brick-d: pranithk-laptop:/gfs/brick-d brick-e: pranithk-laptop:/gfs/brick-e brick-f: pranithk-laptop:/gfs/brick-f brick-g: pranithk-laptop:/gfs/brick-g brick-h: pranithk-laptop:/gfs/brick-h In the example above: ``` Brick | Replica set | Brick subvolume index ---------------------------------------------------------------------------- -/gfs/brick-a | 0 | 0 -/gfs/brick-b | 0 | 1 -/gfs/brick-c | 1 | 2 -/gfs/brick-d | 1 | 3 -/gfs/brick-e | 2 | 4 -/gfs/brick-f | 2 | 5 -/gfs/brick-g | 3 | 6 -/gfs/brick-h | 3 | 7 ``` Each file in a brick maintains the changelog of itself and that of the files present in all the other bricks in its replica set as seen by that brick. In the example volume given above, all files in brick-a will have 2 entries, one for itself and the other for the file present in its replica pair, i.e.brick-b: trusted.afr.vol-client-0=0x000000000000000000000000 -->changelog for itself (brick-a) trusted.afr.vol-client-1=0x000000000000000000000000 -->changelog for brick-b as seen by brick-a Likewise, all files in brick-b will have: trusted.afr.vol-client-0=0x000000000000000000000000 -->changelog for brick-a as seen by brick-b trusted.afr.vol-client-1=0x000000000000000000000000 -->changelog for itself (brick-b) The same can be extended for other replica pairs. Interpreting Changelog (roughly pending operation count) Value: Each extended attribute has a value which is 24 hexa decimal digits. First 8 digits represent changelog of data. Second 8 digits represent changelog of metadata. Last 8 digits represent Changelog of directory entries. Pictorially representing the same, we have: ``` 0x 000003d7 00000001 00000000 | | | | | \_ changelog of directory entries | \_ changelog of metadata \ _ changelog of data ``` For Directories metadata and entry changelogs are valid. For regular files data and metadata changelogs are valid. For special files like device files etc metadata changelog is valid. When a file split-brain happens it could be either data split-brain or meta-data split-brain or both. When a split-brain happens the changelog of the file would be something like this: * Example:(Lets consider both data, metadata split-brain on same file). [root@pranithk-laptop vol]# getfattr -d -m . -e hex /gfs/brick-?/a getfattr: Removing leading '/' from absolute path names \#file: gfs/brick-a/a trusted.afr.vol-client-0=0x000000000000000000000000 trusted.afr.vol-client-1=0x000003d70000000100000000 trusted.gfid=0x80acdbd886524f6fbefa21fc356fed57 \#file: gfs/brick-b/a trusted.afr.vol-client-0=0x000003b00000000100000000 trusted.afr.vol-client-1=0x000000000000000000000000 trusted.gfid=0x80acdbd886524f6fbefa21fc356fed57 ###Observations: ####According to changelog extended attributes on file /gfs/brick-a/a: The first 8 digits of trusted.afr.vol-client-0 are all zeros (0x00000000................), and the first 8 digits of trusted.afr.vol-client-1 are not all zeros (0x000003d7................). So the changelog on /gfs/brick-a/a implies that some data operations succeeded on itself but failed on /gfs/brick-b/a. The second 8 digits of trusted.afr.vol-client-0 are all zeros (0x........00000000........), and the second 8 digits of trusted.afr.vol-client-1 are not all zeros (0x........00000001........). So the changelog on /gfs/brick-a/a implies that some metadata operations succeeded on itself but failed on /gfs/brick-b/a. ####According to Changelog extended attributes on file /gfs/brick-b/a: The first 8 digits of trusted.afr.vol-client-0 are not all zeros (0x000003b0................), and the first 8 digits of trusted.afr.vol-client-1 are all zeros (0x00000000................). So the changelog on /gfs/brick-b/a implies that some data operations succeeded on itself but failed on /gfs/brick-a/a. The second 8 digits of trusted.afr.vol-client-0 are not all zeros (0x........00000001........), and the second 8 digits of trusted.afr.vol-client-1 are all zeros (0x........00000000........). So the changelog on /gfs/brick-b/a implies that some metadata operations succeeded on itself but failed on /gfs/brick-a/a. Since both the copies have data, metadata changes that are not on the other file, it is in both data and metadata split-brain. Deciding on the correct copy: ----------------------------- The user may have to inspect stat,getfattr output of the files to decide which metadata to retain and contents of the file to decide which data to retain. Continuing with the example above, lets say we want to retain the data of /gfs/brick-a/a and metadata of /gfs/brick-b/a. Resetting the relevant changelogs to resolve the split-brain: ------------------------------------------------------------- For resolving data-split-brain: We need to change the changelog extended attributes on the files as if some data operations succeeded on /gfs/brick-a/a but failed on /gfs/brick-b/a. But /gfs/brick-b/a should NOT have any changelog which says some data operations succeeded on /gfs/brick-b/a but failed on /gfs/brick-a/a. We need to reset the data part of the changelog on trusted.afr.vol-client-0 of /gfs/brick-b/a. For resolving metadata-split-brain: We need to change the changelog extended attributes on the files as if some metadata operations succeeded on /gfs/brick-b/a but failed on /gfs/brick-a/a. But /gfs/brick-a/a should NOT have any changelog which says some metadata operations succeeded on /gfs/brick-a/a but failed on /gfs/brick-b/a. We need to reset metadata part of the changelog on trusted.afr.vol-client-1 of /gfs/brick-a/a So, the intended changes are: On /gfs/brick-b/a: For trusted.afr.vol-client-0 0x000003b00000000100000000 to 0x000000000000000100000000 (Note that the metadata part is still not all zeros) Hence execute `setfattr -n trusted.afr.vol-client-0 -v 0x000000000000000100000000 /gfs/brick-b/a` On /gfs/brick-a/a: For trusted.afr.vol-client-1 0x000003d70000000100000000 to 0x000003d70000000000000000 (Note that the data part is still not all zeros) Hence execute `setfattr -n trusted.afr.vol-client-1 -v 0x000003d70000000000000000 /gfs/brick-a/a` Thus after the above operations are done, the changelogs look like this: [root@pranithk-laptop vol]# getfattr -d -m . -e hex /gfs/brick-?/a getfattr: Removing leading '/' from absolute path names \#file: gfs/brick-a/a trusted.afr.vol-client-0=0x000000000000000000000000 trusted.afr.vol-client-1=0x000003d70000000000000000 trusted.gfid=0x80acdbd886524f6fbefa21fc356fed57 \#file: gfs/brick-b/a trusted.afr.vol-client-0=0x000000000000000100000000 trusted.afr.vol-client-1=0x000000000000000000000000 trusted.gfid=0x80acdbd886524f6fbefa21fc356fed57 Triggering Self-heal: --------------------- Perform `ls -l ` to trigger healing. Fixing Directory entry split-brain: ---------------------------------- Afr has the ability to conservatively merge different entries in the directories when there is a split-brain on directory. If on one brick directory 'd' has entries '1', '2' and has entries '3', '4' on the other brick then afr will merge all of the entries in the directory to have '1', '2', '3', '4' entries in the same directory. (Note: this may result in deleted files to re-appear in case the split-brain happens because of deletion of files on the directory) Split-brain resolution needs human intervention when there is at least one entry which has same file name but different gfid in that directory. Example: On brick-a the directory has entries '1' (with gfid g1), '2' and on brick-b directory has entries '1' (with gfid g2) and '3'. These kinds of directory split-brains need human intervention to resolve. The user needs to remove either file '1' on brick-a or the file '1' on brick-b to resolve the split-brain. In addition, the corresponding gfid-link file also needs to be removed.The gfid-link files are present in the .glusterfs folder in the top-level directory of the brick. If the gfid of the file is 0x307a5c9efddd4e7c96e94fd4bcdcbd1b (the trusted.gfid extended attribute got from the getfattr command earlier),the gfid-link file can be found at > /gfs/brick-a/.glusterfs/30/7a/307a5c9efddd4e7c96e94fd4bcdcbd1b ####Word of caution: Before deleting the gfid-link, we have to ensure that there are no hard links to the file present on that brick. If hard-links exist,they must be deleted as well.